How to disassemble the basin faucet?

Basin faucets are common hardware at home. We use basins and basin faucets frequently every day. I believe everyone has encountered the situation that the faucet is blocked, which is very troublesome and a headache. Some people usually ask professional maintenance workers to replace the faucet, but in fact, we can also disassemble it at home.

How to disassemble the basin faucet? Tips for disassembling the basin faucet!

How to remove the basin faucet?

1. Screw on the angle valve before disassembly

Before we disassemble the basin faucet, we must first find the water inlet valve of the basin faucet. The water inlet valve is generally installed on the wall above the basin. We need to screw on the angle valve first to cut off the water, otherwise a lot of water will flow out during the process of disassembling the faucet, causing a lot of waste.

2. Turn on the tap and turn on the water

When we screw on the angle valve and the water source is cut off, there is actually a part of the previous water remaining in the water pipe. At this time, we need to turn on the faucet and drain all the excess water in it. This process is essential. If there is a lot of water in it, it will bring a lot of inconvenience to the subsequent disassembly project.

How to disassemble the basin faucet? Tips for disassembling the basin faucet!

3. Remove the water inlet hose

When installing the faucet, the water inlet hose is used to connect the water inlet of the basin faucet and the angle valve. When disassembling, we only need to press the faucet with one hand, and use the other hand to remove the end of the water inlet hose connected to the basin faucet with an adjustable wrench.

4. Unscrew the fasteners

When we install the basin faucet, after the water inlet hose is installed, it needs to be tightened with nuts. So when disassembling the faucet, we have to do this step again. We need to find the nut and remove it, and then we can take the faucet out.

How to disassemble the basin faucet? Tips for disassembling the basin faucet!

Precautions for disassembling the basin faucet?

1. Don't scratch

During the entire disassembly process, we must pay special attention not to scratch the surface of the faucet. If necessary, we can wear gloves and handle it gently.

2. Drip oil lubrication

The water inlet hose has been used for a long time, and the fasteners will rust. When we disassemble, if we find that the fasteners are rusted, we can add a few drops of oil to lubricate them, and then disassemble, which will be easier. If it is to replace the faucet, it needs to be reinstalled after disassembly. The steps are the same as the disassembly. I hope everyone pays attention to it.

How to disassemble the basin faucet? Tips for disassembling the basin faucet!

Whenever a faucet breaks or needs to be replaced, we disassemble it first. This process does not necessarily require professional maintenance workers to carry out, we can also do it at home. It is very simple. The above are some methods and steps for dismantling the basin faucet introduced by the editor. I hope that friends in need will learn it carefully!